Gel Microfiber Down Alternative Poly Bed

This poly bed should be used with a zippered poly bed or mattress cover/protector at all times. Failure to do so will cause premature wear and invalidate the warranty. A properly covered poly bed will help eliminate stains and the build up of body oils, dirt, and dust. This will also help allergy sufferers.

Periodically take your poly bed outdoors and air it or place in the dryer on a low heat/cool cycle. This helps maintain its freshness, fluffiness and insulating qualities.

Prior to use, shake the poly bed vigorously to help fluff up the Gel Microfiber. It will take about 1 week of use before the outer fabric softens up and the Gel Microfiber lofts up to its full potential.

There may be a slight odour as a result of having been stored in the packaging, but it will disappear within the first week of use.

This product should be stored in a dry and well-ventilated closet or room when not in use in order to prevent mildew growth.

Cleaning Instructions:

• A properly maintained poly bed should only require cleaning after two to five years, with normal use. It may be cleaned more or less often depending on use.
• This product may be machine washed in a large machine in cold water, using mild detergent. Dry on lowest heat until thoroughly dry. If the filling stays even slightly damp, the Gel Microfiber will clump together and may allow mildew growth. Your poly bed is covered in 100% cotton and filled with synthetic Gel Microfiber. If proper washing instructions are not followed, it may shrink, possibly causing puckering in the stitching and loss of the filling.
• Alternatively, you may have your poly bed dry cleaned or professionally washed by a reputable cleaner that specializes in cleaning Gel Microfiber products.
• Small spots or stains may be removed by holding the fabric away from the filling and using warm water and mild soap. To dry, use a hair dryer on low heat.